Deployed my own image within VIRL and getting Error Message Node already exist
@Vic563 wrote: Hi, I deployed my own image within the virl server. But when I add the image to my topology and try to start them up I get an error message stating VIRL "node" with requested ID already...
View ArticleClik here to view.
Salt Status Failed Connect
@Suterusu wrote: I am having the EXACT same issue as the user here: Activation issue. I cannot use VIRL anymore Activation & Installation I have two licenses: old and new one. I've checked with...
View ArticleClik here to view.
Software upgrade issues
@kofi wrote: I get an error message when I try to upgrade the software Screen Shot 2016-03-25 at 11.39.16 AM.png1250x424 47.8 KB Posts: 2 Participants: 2 Read full topic
View ArticleVM Maestro not in /download
@qanadin wrote: So I am trying to download VM Maestro and I am unable to locate it. when I go to the downloads folder all I see is the following: [ ]...
View ArticleClik here to view.
Vm maestro client setup error
@gravityns wrote: vm maestro client setup is giving an error when trying to install it. Can some one tell me how I can get a proper working setup for windows Posts: 1 Participants: 1 Read full topic
View ArticleCCNP Labs
@qanadin wrote: So I am wondering if anybody knows where I could find some labs to practice some skills towards my CCNP. I do plan on purchasing the ROUTE, SWITCH, AND TSHOOT Lab Manual, but more...
View ArticleFrustrated with this bad virl 1.0.26: UWM never access web from win10
@jaheshkhan wrote: last 3 months i was struggling with this product. at last i decided to do clean install with 1.0.26 version that released on february 2016 in vmware workstation 12.I deleted my old...
View ArticleConnecting to images using console telnet ssh
@telestrial wrote: I have VIRL working very nicely with VMWare workstation 12 on a Dell precision with 64Gb under Windows 10. I have about 4 projects with at most 15 nodes, however I can't seem to log...
View ArticleClik here to view.
Custom subtypes not showing up / No Fetch button
@Calvin_Christopher wrote: Hello all and thanks for taking time to look into this. I noticed recently that the Subtypes -> Fetch From Server button was missing from my OS X client, and it was...
View ArticleIOSv2 stops sending all traffic after SYS-2-MALLOCFAIL
@micahcox wrote: I have four IOSv2 switches interconnected in a diamond shape. The default configuration is on them initially. If I work with some show commands on the ports and play with some port...
View ArticleHow To: Packet Capture in VIRL
@alejo wrote: Summary This post relates to our Mar 2016 webinar (*#ref needed) that demonstrates how to use VIRL's Packet Capture feature from User Workspace Management (UWM) and VM Maestro (VMM). The...
View ArticleCSR1000v Throughput Limit Increase
@smolz wrote: Would like to get the throughput limit increased for the CSR image, which right now is at a measly 100Kbps, which is almost useless for most testing. I think the IOSv is at 2Mbps for...
View ArticleClik here to view.
New Install - Having Trouble with Networking
@mickdw68 wrote: I'm new to VIRL and having a bit of trouble getting it up and running. I've installed VIRL on ESX and created and assigned the required port groups for flat, flat2, snat and int....
View ArticleIs IPSec supported on IOSv nodes?
@Kelly_Netterville wrote: I'm labbing out a DMVPN Hub and spoke config and it works without IPSec but, when I add in IPSec for the tunnel protection, only one side seems to come up. Hub: interface...
View ArticleVIRL stopped working. Activation issue
@Jens wrote: I renewed my license back in early December but continued to use the original license-key and everything was working fine until about 2 weeks ago.Now VIRL fails to connect with "Last call...
View ArticleClik here to view.
Bridged Flat1 Network
@PaulH wrote: I'm a touch new to VMware Workstation and I’m trying to configure Flat1 as a bridged network so I can configure the ASAv with multiple external addresses on my local network so I can...
View ArticleFailed to load package versions: internal server error
@xyznetworks wrote: Trying to view VIRL Server | VIRL Software from UWM gives "Failed to load package versions: internal server error." I saw that there was another thread similar to mine but none of...
View ArticleClik here to view.
Virl packet opvn.conf
@smeftahi wrote: Hi, After firing up terraform apply, and rebooting server manually, I cannot see or find ovpn.conf file:All I can think of is that my terraform apply hanged for almost 1hr, I rebooted...
View ArticleClik here to view.
Error when launching simulation: 'ascii' codec can't encode character u'\u2013
@Malick_Ndiaye wrote: Hello All, when I try to launch my simulation, I get the following error: (ERROR) [Mar/30/2016 08:14:24] Failed to start simulation...
View ArticleInstallation on ESX with public IPs
@seawanderer wrote: Hi All,I'd like to have a tip about the installation I'm going to do: ESXi server 5.5 with a single public IP Address, an additional IP address to assign to the VM. My question is:...
View Article