Connecting to UWM
@hudsonmbg wrote: Hi,After finally succeeding to configure a static IP address for Eth0, I can ping from the xterm interface to the Internet, say Cisco.com... My WiFi default gateway ins 192.168.1.1,...
View ArticleG.8032 Support
@John_Plahitko wrote: I'd like to see G.8032 support in IOS-XE Posts: 1 Participants: 1 Read full topic
View ArticleEIGRP over SVI on NX-OS
@derrickwmaritn wrote: Please correct/add the ability to establish EIGRP neighbor relationships over an SVI in NX-OS. While this is a very viable and doable thing in the real world, it doesn't seem to...
View ArticleAdding interface config without AutoNetkit
@jdickson-cc wrote: Hi, I'm evaluating VIRL as a tool for course labs. In a physical environment, we often build on an initial config by adding components. For example in an IVR lab we connect a...
View ArticleMisconfigured NAT settings for default adapter
@Tenjin-virl wrote: Continuing the discussion from Unable to ping out to interent: I recently was unable to connect to any virl server and attempted to ping the Internet but was not successful. I...
View ArticleVIRL System
@vinay_verma80 wrote: Dear Friend I have Few Questions before I want to go VIRL System assembly.1. What is more important in System(PC) Processor – a. No of Cores in Processorb. No of Threads in in...
View ArticleError activation
@jorge.santos wrote: Continuing the discussion from Activation error:After installation, features activation error. Please find attached the screen print Print'virl.png2880x1800 823 KB Posts: 2...
View ArticleConnectivity issues to nodes
@jlixfeld wrote: Hi, I'm having some pretty odd issues connecting my nodes from either VM Maestro or the VIRL VM itself. My topology is configured for Flat management via Management LXC Maestro: If I...
View ArticleOSPFv3 not working on IOSvL2
@hkr01 wrote: Hi,IOSvL2 does not seem to support the OSPFv3.It is not expected to be in the future support? Thank you. Posts: 2 Participants: 2 Read full topic
View ArticleCSR1000v Port-Channel is not working properly
@hkr01 wrote: Hi,The status of the Port-Channel does not become Active in CSR1000v.State of the individual Interface belonging to the channel-group has UP.Are there any possible causes? Thank you....
View ArticleTelnet console doesn't work
@aadsfljasdfljasdfasd wrote: Fresh install of 0.10.21.9, ssh works after VMs are fully booted, but all telnet connections (console/management) does not work. Same for IOSv and XRv Posts: 1...
View ArticlePicking this project back up
@wjh1412 wrote: After some extensive work projects I've decided to pick this project back up and get VIRL running in our environment. How do I go about finding out if my subscription is still active...
View ArticleVLAN Database IOSvL2
@hstepp3 wrote: There appears to be an issue where the vlan database does not always load on the IOSvL2. I change my setting to VTP transparent, create VLANs, save configuration and extract...
View ArticleRunning updated VMMaestro local client
@terryw64 wrote: I'm not a unix/linux person. I've updated first the VMMaestro Linux 64, then the VMMaestro local client from 1.2.4-363 to 1.2.5-386. When I run the VMMaestro local client within the...
View ArticleCrypto Session Is Down
@OPENSTACK wrote: Problem: Whenever I applied the CRYPTO MAP (MyMap) to the interface that will be sending the encrypted traffic (G2), the interface stopped sending traffic. I did not have this...
View ArticleHigh Memory Utilization VM Workstation 12 Pro
@aparikh wrote: As soon as I start the VIRL in VMware Worksation 12 Pro, memory utilization goes from 25% to 95%. I cannot run any simulatoin with VM Maestro.My host is Intel Core i5 5300@2.3 with 8...
View ArticleCan't ping the LAN from Flat network
@lucas.shelton1 wrote: I'm trying to get VIRL configured so I can access devices over my LAN. I have a topology setup using Shared Flat Network. I can't ping the gateway from the router in VIRL. We...
View ArticleMgmt-lxc port down or stuck in building
@aadsfljasdfljasdfasd wrote: After upgrading to the latest version, mgmt-lxc sIeems to start having issues Ports of network ----<~mgmt-lxc>- BUILD 10.255.0.9 Ports of network...
View ArticleCant update VIRL-CORE!
@okaenrique wrote: Hello! i cant update VIRL-CORE from 0.10.22.2 to 0.10.22.3 , when i click on install and start installation i get finsh but when i back is still version 0.10.22.2 , i try restart my...
View ArticleCannot access software management from UWM
@kboesman wrote: After updating the latest VIRL core update, i cannot access UWM software management page. Everything else within UWM seems functional and no impact to simulations. Any suggestions?...
View Article