@richziga wrote:
I have been using VIRL for around 6 months off and on... But I just discovered today that there is supposed to be a jump host. I do not ever remember seeing it. I have version virl.0.9.242.pc. Is there a way I can try to identify what the problem might be?
Posts: 2
Participants: 2
@aadsfljasdfljasdfasd wrote:
It would be really nice to have a android/ios client. Is it on the roadmap already?
Posts: 2
Participants: 1
@Keenan wrote:
What are the chances that Cisco security products such as FirePOWER, AMP and ISE will be added to VIRL?
I would love to be able to practice and test out the different features that these products have to offer for test preparation purposes AND for testing purposes for my production network.
Posts: 1
Participants: 1
@tahigash wrote:
Hi,
I tried to use RestAPI on CSR1000V, but I encountered following error when activating a virtual service.
Please let me know if there are any way to increase space of bootflash on CSR1000V.Router(config)# virtual-service csr_mgmt
Router(config-virt-serv)# vnic gateway VirtualPortGroup0
Router(config-virt-serv-vnic)# guest ip address 10.255.0.25
Router(config-virt-serv-vnic)#activate
% Activating virtual-service 'csr_mgmt', this might take a few minutes. Use 'show virtual-service list' for progress.Router(config-virt-serv)#
*Mar 10 14:13:13.178: %VMAN-3-VIRT_INST_DISK: F0: vman: Virtual Service[csr_mgmt]::Disk reservation::Failed to reserve disk storage for virtual service::Disk storage request (756 MB) exceeds remaining disk space (496 MB) on storage media
*Mar 10 14:13:14.421: %VIRT_SERVICE-5-ACTIVATION_STATE: Failed to activate virtual service csr_mgmtRouter#dir
Directory of bootflash:/11 drwx 16384 Aug 4 2015 23:09:35 +09:00 lost+found
139105 drwx 4096 Aug 4 2015 23:13:02 +09:00 .super.iso.dir
12 -rw- 45 Mar 10 2016 23:05:24 +09:00 .CsrLxc_LastInstall
19 -rw- 2463 Mar 10 2016 23:08:56 +09:00 csrlxc-cfg.log
92737 drwx 4096 Aug 4 2015 23:29:29 +09:00 .ssh
15 -rw- 161587200 Aug 4 2015 23:12:27 +09:00 iosxe-remote-mgmt.03.16.00.S.155-3.S-ext.ova
30916 -rw- 286708160 Aug 4 2015 23:24:30 +09:00 csr1000v-mono-universalk9.03.16.00.S.155-3.S-ext.SPA.pkg
30914 -rw- 4874 Aug 4 2015 23:24:30 +09:00 csr1000v-packages-universalk9.03.16.00.S.155-3.S-ext.conf
30915 -rw- 5662 Aug 4 2015 23:24:30 +09:00 packages.conf
123649 drwx 4096 Aug 4 2015 23:29:30 +09:00 core
77281 drwx 4096 Aug 4 2015 23:29:30 +09:00 .prst_sync
108193 drwx 4096 Aug 4 2015 23:29:34 +09:00 .rollback_timer
13 -rw- 0 Aug 4 2015 23:29:36 +09:00 tracelogs.285
123650 drwx 4096 Mar 10 2016 23:16:20 +09:00 tracelogs
77282 drwx 4096 Aug 4 2015 23:29:45 +09:00 .installer
16 -rw- 0 Mar 10 2016 23:07:44 +09:00 cvac.log
17 -rw- 30 Mar 10 2016 23:07:52 +09:00 throughput_monitor_params
14 -rw- 83 Mar 10 2016 23:08:25 +09:00 virtual-instance.conf
30917 drwx 4096 Mar 10 2016 23:08:55 +09:00 onep1494446080 bytes total (520650752 bytes free)
Router#Router#show file system
File Systems:Size(b) Free(b) Type Flags Prefixes - - opaque rw system: - - opaque rw tmpsys:
- 1494446080 520650752 disk rw bootflash: flash:
- - opaque rw null:
- - opaque ro tar:
- - network rw tftp:
33554432 33535937 nvram rw nvram:
- - opaque wo syslog:
- - network rw rcp:
- - network rw pram:
- - network rw http:
- - network rw ftp:
- - network rw scp:
- - network rw https:
- - opaque ro cns:Router#sh ver | i IOS
Cisco IOS XE Software, Version 03.16.00.S - Extended Support Release
Cisco IOS Software, CSR1000V Software (X86_64_LINUX_IOSD-UNIVERSALK9-M), Version 15.5(3)S, RELEASE SOFTWARE (fc6)
Posts: 3
Participants: 2
@pjdouglas wrote:
Hi,
Recently installed VIRL on our VM server and although everything seem to go well activation as been a pain.
The server has full internet access and I can browse the internet without problems.
The activation error I get is: [Errno 2] No such file or directory: '/etc/salt/pki/minion/minion_master.pub'I have checked the obvious like the salt ID, email address, IP address and internet access and everything seems fine.
Really would appreciate some help.
Kind Regards
Paul
Posts: 2
Participants: 2
@JJBEE83 wrote:
Hi,
Has anyone had the issue when even though you've saved your config, you reload your router and the interfaces are admin down? Why does this happen?
I was trying to simulate a failover scenario and reloaded one of my routers to find the traffic hadn't failed back and it was because when the IOSv had completed it's boot again all interfaces were admin down! Annoying.
Anyone had this issue or know a way around it?
Thanks
Posts: 1
Participants: 1
@Stephen74_Cisco wrote:
I purchased the VIRL software and now I am confused about which files I need to download from the Download Software page: https://software.cisco.com/download/specialrelease.html#SR/286290254/286290305
I am using VMware Workstation 12 Player and I am currently downloading (via DownThemAll, thanks for the recommendation): virl.1.0.26.pc.ova
Is that the only file I need?
Thank you for any clarification!
Posts: 2
Participants: 2
@adventjay wrote:
Error I get:
Failed to launch CCNA_security_asa-73I4Zr.virl: STD simengine-launch request [POST] http://localhost:19399/simengine/rest/launch?file=tmpJfyOtq&session=test received invalid response status 400 (There are flavors required by topology, but not available to STD: "ASAv")
I know the ASAv works because I used it last night. Today, when I spin up the server on packet.net and go to launch the simulation I'm working on, it gives me that above message. I see the ASAv image under the images tab but NOT under the flavors tab. How do I get it in the flavors tab to get passed this error?
Posts: 1
Participants: 1
@jbiggs1357 wrote:
So I watched the video for VIRL on packet, downloaded the install doc, printed all the README's out....and now I am THOROUGHLY confused...I have a window PC running VMWare workstation to host my VIRL server...I am confused as to what I am supposed to install/not install...install on VIRL vs install on my desktop.....do we have a "WINDOWS" manual for this....I made it all the way to the "setup an openVPN" client...and now I am all over the place.
thanks
Posts: 4
Participants: 2
@aadsfljasdfljasdfasd wrote:
*Mar 12 19:33:52.217: %IOSXE-4-PLATFORM: R0/0: kernel: e1000: Gi3: e1000_phy_read_status: Error reading PHY register
I saw this when I issued
no shuton the interface. But it looks like the interface still works tho. Cosmetic?
Posts: 2
Participants: 2
@aadsfljasdfljasdfasd wrote:
on CSR1000v,
show ospfhas the same commands asshow ip ospf, exceptshow ospfdoesn't actually workI am unable to find anything about
show ospfin IOS XE command reference. Is this a bug?bb1#show ospf 1 traffic
% OSPFv3: Unknown Process ID 1bb1#show ip ospf 1 traffic
OSPF Router with ID
Posts: 2
Participants: 2
@aadsfljasdfljasdfasd wrote:
Without autonetkit, csr1000v has ge1 interface configured, but iosv is missing configuration on ge0/0 interface and its status is admin down. Aparently the 10.255.0.x address is still being used by VM Maestro for telnet to management interface.
Is this a bug?
Posts: 2
Participants: 2
@okaenrique wrote:
Static redistribution not work into eigrp
i can ping to another switch but when i ping 8.8.8.8 no replay .
ping is work fine on IOSV-3 but not on 2 or 1
Posts: 1
Participants: 1
@Hank_N wrote:
VIRL is designed to replace GNS3 and/or a lab of Cisco routers. What do each of these have in common? They can easily be run off-line - not connected to the Internet.
VIRL on the other hand, requires an Internet connection. Has anyone figured a way around that?
Posts: 2
Participants: 2
@edjacks wrote:
Hello, I would like to save some modifications that I've made to an LXC host as a separate image that I could use for future and different topologies. Is there a way to make a 'snapshot' or 'image' of a running LXC instance that would allow me to be able to re-use the instance w/o having to modify it every time?
Is this possible with an non-LXC image like a KVM based Ubuntu image?
Thanks,
Ed Jackson
Posts: 2
Participants: 2
@M.Suleman_Hayat wrote:
I am stuck on validating my VIRL license. Please respond me at hayatms@gmail.com.
I have Cisco TAC case open but no one responded me so far. Case# 680257431.
Posts: 1
Participants: 1
@terryw64 wrote:
I've looked through the post on how to do do packet capture with wireshark on a Mac.
I did come across one reply that looked promising. As it looked to pipe into a file and then have Wireshark read from that file. The syntax was as of follows on the OS side. I kept getting an end of pipe error.
mkfifo /tmp/sharkfin
nc 192.168.143.129 10007 > /tmp/sharkfin (I assume the ip address or hostname is the same one used to get to the uwm console. If not, maybe this is the problem.I'm not a unix person.
Can anyone give me clear cut instructions on how to do a live capture on a Mac. It would greatly be appreciated. My subscription is up for renewal at the end of the month. I'm really trying to decide whether to resubscribe for another year.
Thank you
Posts: 1
Participants: 1
@mrosi_NTS wrote:
I Don't know what append, but at a cert point, when i tried to access to devices using CRT as client, on the link (as showed in the picture) don't appear anymore the other choices and only the "management port"
The configuration concerning the CRT is correct
Tring to connect using only the management port it says:
...and till last week everything was working.
And VIRL is talking with the server:
Any ideas?
Thanks,
Mario
Posts: 2
Participants: 1
@CCIEMatt wrote:
Hello,
Using the latest VIRL version (VIRL CORE 0.10.22.7, Autonetkit 0.21.4/0.21.6), and after verifying NTP is ok (sudo ntpq -p) and restarted Openstack via sudo salt-call state.sls openstack-restart
Under UWM/VIRL Server/System Status: Openstack system services my status is red with the following detail:
virl (controller):
some services should be up but are not: glance-api, glance-registry, nova-api, nova-cert, nova-compute, nova-conductor, nova-consoleauth, nova-novncproxy, nova-scheduler, neutron-dhcp-agent, neutron-l3-agent, neutron-metadata-agent, neutron-plugin-linuxbridge-agent, neutron-serverOpenStack services response
AutoNetkit services
OpenVPN services
VIRL-CORE services
STD configurationWhat am I missing out ?
Posts: 2
Participants: 1
@eman wrote:
I have updated my VIRL server to 0.10.22.7 a while ago. I have noticed that the memory is just being ate up by VIRL process and is at ~32% RAM utilization after letting the system run for awhile. I have 16GB of RAM dedicated to the VM and it is running on an ESXi 5.5 server. I have done a search of the Community but nothing really fits this situation, so my question is what should I do to plug this leak?
Posts: 1
Participants: 1
